Jump to content

[2 Binned] A better way to make your cult base. (Or better in general)


Recommended Posts

Currently the only way to make your sp00ky cult temple with the cult walls/floor is with a construct using magic 3x3, or converting each tile one at a time with breaking and replacing walls. This is extremely slow in converting the room you wish to make anti security and never done. I think there should be a way to convert rooms faster.

For this, APCs would be corrupted, funneling your evil dark magic to the room and corrupting said room. This would be EXTREMELY obvious due to everyone seeing this with a room slowly turning into stone.

 

This is a example APC

temporary_1492439561303.png

Or

temporary_1492448762700.png

 

Fixing the APC would be the same as fixing a malf AIs APC through a diagnostic/deconstruction (Because of the new APC tweaks)

Converting a APC would require a ruin next to it or a paper you made, take around 30 seconds to a minute, the APC would shut off, unlock to only cultests, and turn on when it rebooted.

This could have a little extra buff, maybe a little extra power for pylons around the room (Or just restrict pylons to this room with the APC, have like three pylons per room) or each APC would increase the cult ruin max limit.

This would help make cult something other then run around the station and murder bone, then Nar'sie.

Link to comment
What´s the counter to this, ?

How do you propose engineering reverts the effected rooms ?

When the APC gets converted back, or broken, the rook can gradually turn back to normal and the chaplain can purge the dark magic. I was thinking you would need a certain amount of cult members to start doing this.

Link to comment
  • 2 months later...
  • 1 month later...
×
×
  • Create New...